STA-BIL · Replacement Parts & Maintenance

STA-BIL 22007 Pump Protector, 4 oz

Our take

STA-BIL 22007 is a preventive storage product for a pressure-washer pump, with a dispensing hose that connects at the water inlet. It is useful when you want pump lubrication and freeze protection as part of the washer’s approved storage routine. Buy it before the last cleaning job of the season, and follow both the can label and washer manual. It is not fuel stabilizer, detergent, descaler or a repair for a leaking pump.

In this review
Selected product
STA-BIL 22007 Pump Protector
Can size
4 oz
Application point
Pump water inlet
Dispensing connection
Attached hose

A good fit for

A pressure-washer owner preparing an approved pump-storage routine, including cold-weather storage.

Reasons to keep looking

Treating gasoline, removing established scale, repairing a cracked pump or replacing the washer’s full winterization instructions.

Specifications

Selected product
STA-BIL 22007 Pump Protector

Keep it separate from the brand’s fuel-storage products.

Can size
4 oz

The selected listing is one can, not a multi-pack.

Application point
Pump water inlet

Do not put it in the fuel tank or detergent bottle.

Dispensing connection
Attached hose

Follow the label’s connection and flow-through directions.

Purpose
Pump storage lubrication and freeze protection

Preventive care rather than a repair.

Washer formats
Manufacturer lists gas and electric

Your exact machine’s approved storage procedure still applies.

Treatments per can
Not established here

Do not budget a fixed number without the label and actual usage.

What’s included

  • Selected can. One 4-ounce STA-BIL Pump Protector can, model 22007, with its dispensing hose.
  • Other storage supplies. Fuel treatment, cleaning products, replacement seals and other maintenance items are separate purchases when required by the machine.

Choose the setup around this tool

Compare the formats and model choices in safety, storage & accessories.

Treat the pump and fuel system as different jobs

An electric washer has no gasoline tank, but it still has a water pump that needs the manufacturer’s storage care. A gas washer adds an engine and fuel system with their own requirements. Pump Protector belongs to the water-pump side of that plan.

Keep the can with the washer’s storage instructions rather than beside fuel treatment without a label. STA-BIL sells several maintenance products, and the familiar brand name does not make their application points interchangeable. This 22007 product connects at the pump’s water inlet.

Check the connection while the washer is accessible

Before putting the machine behind other tools, find its water inlet and review the shutdown and pressure-release procedure. Gold Eagle’s directions connect the attached dispensing hose at that inlet, leave the pump’s wand-side hose disconnected as directed, and dispense until protective liquid exits the pump.

Use the current can label and the exact washer manual for the full procedure. Keep the machine in the required stopped and disconnected condition, and collect runoff as appropriate to the label. Do not improvise an application through a nozzle, detergent tank or fuel filler because the intended inlet is hard to reach.

Make winter preparation a complete storage plan

The pump is one part of a washer that has held water. The hose, gun, wand and accessories also need their specified drainage and storage care. A protected pump is not evidence that every attached part can be left with trapped water in freezing conditions.

For the ePX3100v, the operator manual includes cold-weather storage instructions and a warning about storage below 40°F. Read that machine-specific guidance alongside the product label. The generic phrase winterizer does not override the washer manufacturer’s location, drainage or maintenance requirements.

Use it for prevention, not a repair promise

The selected listing describes preventing harmful mineral buildup during inactivity, not removing deposits that are already present. If the pump already leaks or the washer has lost performance, identify the fault and the correct service procedure first.

Lubrication is not a substitute for a damaged seal, a cracked housing or a blocked connection. Buy this can for an approved storage routine; do not buy it on the assumption that a flow-through treatment will repair a machine that needs parts or service.

Compare the storage method, not just the bottle size

A useful alternative is the SIMPSON 80273 Pump Guard already covered here. Compare each product’s current application directions and your washer’s approved maintenance requirements. Bottle size alone does not tell you which connection or dispensing procedure fits your setup.

This review does not establish a fixed number of treatments from the four-ounce can or an independently tested minimum storage temperature. Keep those unknowns out of the purchase calculation. A can left unused on the shelf does not protect the pump; the useful purchase is a product you can apply correctly at the end of the session.

AFTER THE FIRST JOB

Care, storage & ownership

Keep the label with the can

Read handling, storage and disposal instructions before use. Store the can as labeled, away from the wrong application supplies, and keep its hose and cap intact.

Before the next cleaning session

Follow the washer manual’s return-to-service procedure. Inspect connections and components and confirm the required water supply before operating the washer again.

What changes with another choice

Scroll across to compare the documented details.

ModelSTA-BIL 22007 Pump Protector, 4 ozSIMPSON 80273 pressure washer pump guardWestinghouse ePX3100v handheld electric pressure washer
Documented details
Selected product
STA-BIL 22007 Pump Protector
Can size
4 oz
Application point
Pump water inlet
Dispensing connection
Attached hose
Capacity and format
4 fl. oz. aerosol can
Protection role
Lubricates pistons and seals; protects the pump during storage
Cold-weather claim
Antifreeze and winterizer protection as low as -25°F
Equipment compatibility
Gas or electric pressure washers
Model
ePX3100v
Rated operating pressure
1,800 PSI
Rated operating flow
1.2 GPM
Maximum pressure
2,100 PSI
Reason to consider itA pressure-washer owner preparing an approved pump-storage routine, including cold-weather storage.SIMPSON 80273 Pump Guard offers a different pump-storage product to compare by approved application procedure and connection fit.The ePX3100v is a separate washer purchase with its own storage instructions, not a product included with the protector.

Common questions

Does this go in the gasoline tank?

No. STA-BIL Pump Protector is applied through the pressure-washer pump’s water inlet. Fuel stabilizer is a separate product for a different system.

Will it repair a leaking pressure-washer pump?

This is preventive storage care. It is not evidence of a repair for a cracked housing, damaged seal or another fault requiring service.

Does protecting the pump winterize the hose and wand too?

Do not assume so. Follow the washer and accessory instructions for drainage, shutdown and storage of the complete system.

How many treatments does the four-ounce can provide?

A fixed count is not established here. Follow the current label’s flow-through directions and budget from the actual approved use rather than an invented treatment count.

Model details, manuals & sources
STA-BILSee the exact model & kit
View on Amazon Paid link